PTD-1,PTD-2 &3
CURRENT PROBE TEST DEVICE
The PRODYN PTD-1 is a device designed to test and calibrate the PRODYN I-300, I-310, and I-320 spring clamp-on type current probes. When probes are clamped over the conductor, current is driven through the probe from one connector and is terminated on the other with a matching impedance across bandwidth of generator used, thereby drawing full load current through the probe.
CURRENT PROBE TEST DEVICE
The PRODYN PTD-2 and PTD-3 are easy to use two-piece devices designed to test and calibrate current probes larger than the spring clamp-on probes. Current is driven through the probe from one connector and is terminated on the other with a matching impedance across bandwidth of generator used, thereby drawing full load current through the probe.
The PTD-2 will accommodate the Kwik-Latch® I-125 series (or the 94430 and 91550 series) current probes. The PTD-3 will accommodate the Kwik-Latch®
I-262 series (or the 93686 and 94456 series) current probes.
Specifications |
PTD-2 |
PTD-3 |
| Probe Aperture Diameter (in.) | .75, 1.25 |
2.62, 4.00 |
| Connectors | Type N |
Type N |
| VSWR with Probe | 1.2:1, 0-250 Mhz |
1.5:1, 0-150 Mhz |
| Dimensions (in.) L | 4.5 |
8.0 |
W |
2.5 |
3.2 |
H |
4.5 |
8.0 |